A joint project of the Graduate School, Peabody College, and the Jean & Alexander Heard Library

Title page for ETD etd-09232014-144836


Type of Document Dissertation
Author Babjak, Benjamin
URN etd-09232014-144836
Title Hardware-Software Partitioning of Soft Multi-Core Cyber-Physical Systems
Degree PhD
Department Electrical Engineering
Advisory Committee
Advisor Name Title
Akos Ledeczi Ph.D. Committee Chair
Aniruddha S. Gokhale Ph.D. Committee Member
Janos Sallai Ph.D. Committee Member
Pietro Valdastri Ph.D. Committee Member
Theodore Bapty Ph.D. Committee Member
Keywords
  • code generation
  • Acoustic Emission
  • WSN simulation
  • Embedded system
  • Flash FPGA
Date of Defense 2014-09-16
Availability unrestricted
Abstract
Typical single microcontroller embedded systems cannot easily satisfy the computational requirements of a new class of cyber-physical systems. For systems observing physical phenomena via multiple channels at high sampling rates, only FPGAs can provide the necessary trade-off between adaptivity and computational power. Yet, common SRAM FPGAs are hardly applicable for low-power applications due to inrush currents associated with duty-cycling. Novel flash FPGAs mitigate this problem; our platform, called MarmotE, is based on this concept. However, fewer developers are familiar with FPGAs, and the microcontroller approach has a large legacy code base to reuse. Thus, we propose a soft multi-core architecture in the fabric forming a loosely coupled network with a queue-based messaging framework for inter-core communication. This platform provides parallel improvements (as per Amdahl's Law) and a familiar Harvard abstraction. Cores may run at different clock rates for optimum power consumption. The nesC language was chosen for programming, as it enables modularity and assignment of independent tasks to cores. The single core development environment was augmented to help with the transition to the new architecture. A cycle accurate system simulator, called Avrora, was enhanced to fully support multi-core platforms. It evaluates whole sensor networks employing only the compiled binaries meant for the cores. Finally, a comprehensive Structural Health Monitoring case study has been conducted to show the level of system complexity, and demonstrate the benefits of the parallel platform. The main advantage of the architecture is that it provides better power consumption and response time properties for time critical applications by effectively pipelining tasks. It is especially beneficial, if most soft cores can be utilized equally.
Files
  Filename       Size       Approximate Download Time (Hours:Minutes:Seconds) 
 
 28.8 Modem   56K Modem   ISDN (64 Kb)   ISDN (128 Kb)   Higher-speed Access 
  Benjamin_Babjak_Dissertation.pdf 9.58 Mb 00:44:22 00:22:49 00:19:57 00:09:58 00:00:51

Browse All Available ETDs by ( Author | Department )

If you have more questions or technical problems, please Contact LITS.